Research Article |
Array of Rectangular Patch Antenna with Asymmetric Slot for L-Band Applications
Author(s): Sarbar Khan
Published In : International Journal of Electrical and Electronics Research (IJEER) Volume 3, issue 2
Publisher : FOREX Publication
Published : 30 june 2015
e-ISSN : 2347-470X
Page(s) : 15-18
Abstract
In this paper, array of microstrip patch antenna is designed for communication in wireless application in L-BAND. Single element and 2x1 array of rectangular microstrip patch antenna is designed and simulated by a full wave simulator (IE3D). Two rectangles of length 42mm and width 38.9mm with asymmetric slots is simulated. The design is fabricated on ground with relative permittivity (€r) of 2.2 and thickness 1.6mm. This design has a resonance frequency of 2.44 GHz and achieved a return loss of -41.4176dB. Coaxial feeding is used in this antenna design. Some other important parameters of simulated results of the proposed antenna such as Return loss, Smith chart, directivity, gain are also mentioned and discussed. The proposed design finds application in L-BAND especially in BLUETOOTH devices.
Keywords: Microstrip patch antenna (MPA)
, Rectangular microstrip patch antenna (RMPA)
, Array of Rectangular Microstrip patch antenna (ARMPA)
, L – Band Applications
.
Sarbar Khan*, Department of Electronics and Communication RJIT, Tekanpur, Gwalior, M.P., India; Email: sarbarkhan8@gmail.com
-
[1] Ali M., Seyyed H. Mohseni A., and Ali R. E., “Millimeter-Wave Energy Harvesting Using 4 x 4 Microstrip Patch Antenna Array”, IEEE ANTENNAS AND WIRELESS PROPAGATION LETTERS, VOL. 14, 2015.
-
[2] Rajkumar R., Pankaj G., Aashi R., Anjali P., ” Development of Trapezium Cut Shape Rectangular Microstrip Patch Antenna & Compare with Normal Microstrip Patch Antenna”, International Journal of Advanced Research in Electrical, Electronics and Instrumentation Engineering (An ISO 3297: 2007 Certified Organization) Vol. 3, Issue 6, June 2014.
-
[3] Md. Amirul I., Sohag K. S., Md. Masudur R., “Dual U- Shape Microstrip Patch Antenna Design for WiMAX Applications”, International Journal of Science, Engineering and Technology Research (IJSETR) Volume 2, Issue 2, February 2013.
-
[4] Yahya S. H. K., Melad M. O. & Sharief N. A., “Comparison between Rectangular and Triangular Patch Antennas Arrays” , Applied Physics Research, Vol. 4, No. 2; 2012.
-
[5] Rampal K., Prof. K. C., “ Design and analysis of gain for rectangular microstrip patch antenna using symmetrical cuts” , International Journal of Advance Technology & Engineering Research (IJATER), Vol. 1, Issue 1, November 2011.
-
[6] Dalia N., Hala A. E., Esmat A. A., Magdy F. I., and Hadia M. E. H., “Ultrawide Bandwidth 2x2 Microstrip Patch Array Antenna Using Electromagnetic Band-Gap Structure (EBG)”, IEEE TRANSACTIONS ON ANTENNAS AND PROPAGATION, VOL. 59, NO. 5, MAY 2011.
-
[7] Xin M. Y., Quan H. S., Ya J., Qiang Cheng, X. Y. Z., Hong W. K., and Tie J. C., “Increasing the Bandwidth of Microstrip Patch Antenna by Loading Compact Artificial Magneto-Dielectrics”, IEEE TRANSACTIONS ON ANTENNAS AND PROPAGATION, VOL. 59, NO. 2, FEBRUARY 2011.
-
[8] H. W., X. B. H., and D. G. F., “A Single Layer Wideband U-Slot Microstrip Patch Antenna Array”, IEEE ANTENNAS AND WIRELESS PROPAGATION LETTERS, VOL. 7, 2008.
-
[9] Indrasen S., Dr. V.S. Tripathi, “ Micro strip Patch Antenna and its Applications: a Survey”, Indrasen Singh et al, Int. J. Comp. Tech. Appl., Vol. 2 (5), 1595-1599.