FOREX Press I. J. of Electrical & Electronics Research
Support Open Access
  • Home/
  • IJEER-100330

Research Article |

Finite Element Electromagnetic Based Design of Universal Motor for Agro Application

Author(s): Sudhir Kumar Sharma1 and Manpreet Singh Manna2

Published In : International Journal of Electrical and Electronics Research (IJEER)        Volume 10, Issue 3

Publisher : FOREX Publication

Published : 10 September 2022

e-ISSN : 2347-470X

Page(s) : 590-596

DOI: https://doi.org/10.37391/IJEER.100330

Abstract

The commutator part of the universal motor has a considerable effect on the machine's performance. The analysis of pole structure of universal motor becomes important to study the various aspects. The parametric analysis has ratings of 1 kW, 16000 rpm of the universal model designed for different iterations of brush angle for agro applications. The objective of the paper is to improve the efficiency of the model while maintaining the rest of the other parameters at the desirable tolerance range. The customization of the model has been introduced for the various pairs of variables. The transient solution is performed for the better accuracy of the performance of the motor with the help of the finite element method. The designed model offers significant improvement in the design with the improved output torque value.

Keywords: Universal motor, brush angle, Maxwell, steel material, shaft




Sudhir Kumar Sharma, Research Scholar, Research Scholar, Department of Electrical and Instrumentation Engineering, Sant Longowal Institute of Engineering and Technology, Longowal, Sangrur, Punjab, India; Email: sudhirs390@gmail.com

Manpreet Singh Manna, Associate Professor, Department of Electrical and Instrumentation Engineering, Sant Longowal Institute of Engineering and Technology, Longowal, Sangrur, Punjab, India; Email: msmanna@ieee.org

    [1] Saidur, R., Rahim, N. A., Islam, M., & Solangi, K. (2011). Renewable and Sustainable Energy Reviews. Renewable and Sustainable Energy Reviews, 15, 2261-2289. [Cross Ref]
    [2] Elektrikli Ev Aletlerinde A.C. Motorlar 522EE0094 Ankara, pp. 51, 2011.[Cross Ref]
    [3] Taylor, E. O. (2000). The Performance and Design of AC Commutator Motors: Including the Single-phase Induction Motor. Wheeler Publishing.[Cross Ref]
    [4] Gregor, B., & Tomaz, B. (2003). Efficiency Improvement in Universal Motor Using Evolutionary Optimization. IEEE Trans. on Industrial Electronics, 50(2), 601-612.[Cross Ref]
    [5] Záskalický, P., & Dupej, J. (2006). Modeling of An Universal Motor supplied by a Harmonic Voltage. In 2006 12th International Power Electronics and Motion Control Conference (pp. 1070-1073). IEEE.[Cross Ref]
    [6] Stölting, H. D., Kallenbach, E., & Amrhein, W. (Eds.). (2008). Handbook of fractional-horsepower drives (pp. 33-66). Berlin, Heidelberg, New York: Springer.[Cross Ref]
    [7] Chan, C. C., & Chau, K. T. (1991). Design of electrical machines by the finite element method using distributed computing. Computers in industry, 17(4), 367-374.[Cross Ref]
    [8] Manna M.S., Marwaha S., Garg N. 2010: Modeling and simulation of linear induction motor by using 2D FEM. International Journal of Emerging Technologies and Applications in Engineering Technology & Sciences (IJ-ETA-ETS): 286-289.[Cross Ref]
    [9] Manna M.S., Marwaha S., Vasudeva C. 2009: Two dimensional quasi static magnetic field analysis of SLIM using adaptive finite element method. Int. Journal of Recent Trends in Engineering, ACEEE and Academy Publishers, Finland. 2-6:50-52.[Cross Ref]
    [10] Manna M.S., Marwaha S., Rai H.M 2010: Application of finite element method to find the efficiency of linear induction motor with constant voltage feeding. International Journal of Electronics Engineers IJEE. 1-1:41-43.[Cross Ref]
    [11] Manna M.S., Marwaha S., Marwaha A. 2011: Performance optimization of linear induction motor by eddy current and flux density distribution analysis. Journal of Engineering Science and Technology, School of Engineering, Tylor’s University, Malaysia. 6-6: 769-776.[Cross Ref]
    [12] Nayak, D. S., & Shivarudraswamy, R. (2022). Loss and Efficiency Analysis of BLDC Motor and Universal Motor by Mathematical Modelling in the Mixer Grinder. Journal of The Institution of Engineers (India): Series B, 103(2), 517-523.[Cross Ref]
    [13] S. K. Sharma and M. S. Manna, "Performance Analysis of Universal Motor Based on Matlab Simulation," 2022 International Conference for Advancement in Technology (ICONAT), 2022, pp. 1-4, doi: 10.1109/ICONAT53423.2022.9726017.[Cross Ref]
    [14] Qi, H., Ling, L., Jichao, C., & Wei, X. (2020). Design and research of deep slot universal motor for electric power tools. Journal of Power Electronics, 20(6), 1604-1615.[Cross Ref]
    [15] D. R. Farrahov and A. K. Miniyarov, "Development of The Universal Apparatus for Induction Motors with Combined Winding Design," 2019 International Conference on Electrotechnical Complexes and Systems (ICOECS), 2019, pp. 1-4, doi: 10.1109/ICOECS46375.2019.8949978.[Cross Ref]
    [16] Nayak, D. S., & Swamy, R. S. (2018, October). Loss and efficiency analysis of universal motor used in mixer grinder by mathematical modelling. In 2018 IEEE International Conference on Automatic Control and Intelligent Systems (I2CACIS) (pp. 105-110). IEEE.[Cross Ref]
    [17] Kurihara, K., & Koseki, S. (2018, September). New design of high output equivalent 4-pole universal motor. In 2018 XIII International Conference on Electrical Machines (ICEM) (pp. 291-296). IEEE.[Cross Ref]
    [18] L. Xheladini, A. Tap, T. Aşan, M. Yılmaz and L. T. Ergene, "Permanent Magnet Synhronous Motor and Universal Motor comparison for washing machine application," 2017 11th IEEE International Conference on Compatibility, Power Electronics and Power Engineering (CPE-POWERENG), 2017, pp. 381-386, doi: 10.1109/CPE.2017.7915201.[Cross Ref]
    [19] M. M. Tezcan, A. I. Çanakoğlu, A. G. Yetgin, A. Gün, B. Cevher and M. Turan, "Analysis of one phase special electrical machines using finite element method," 2017 International Conference on Electromechanical and Power Systems (SIELMEN), 2017, pp. 113-118, doi: 10.1109/SIELMEN.2017.8123321.[Cross Ref]
    [20] A. Polat, L. T. Ergene and A. Firat, "Dynamic modeling of the universal motor used in washer," International Aegean Conference on Electrical Machines and Power Electronics and Electromotion, Joint Conference, 2011, pp. 444-448, doi: 10.1109/ACEMP.2011.6490640.[Cross Ref]
    [21] D. Lin, P. Zhou and S. Stanton, "An analytical model and parameter computation for universal motors," 2011 IEEE International Electric Machines & Drives Conference (IEMDC), 2011, pp. 119-124, doi: 10.1109/IEMDC.2011.5994773.[Cross Ref]
    [22] T. J. E. Miller and M. Willig, "Calculation of the armature inductance of the universal AC commutator motor," The XIX International Conference on Electrical Machines - ICEM 2010, 2010, pp. 1-6, doi: 10.1109/ICELMACH.2010.5607743.[Cross Ref]
    [23] Y. Niwa and Y. Akiyama, "The relation of a brush life to the commutator width and brush width ratio of a universal motor," 2009 International Conference on Power Electronics and Drive Systems (PEDS), 2009, pp. 1384-1389, doi: 10.1109/PEDS.2009.5385711.[Cross Ref]
    [24] Kurihara, K., Yamamoto, K., & Kubota, T. (2009, November). Commutation analysis of universal motors taking into account brush-to-bar voltage drop. In 2009 International Conference on Electrical Machines and Systems (pp. 1-4). IEEE.[Cross Ref]
    [25] Di Gerlando, A., & Perini, R. (2006). Model of the commutation phenomena in a universal motor. IEEE Transactions on Energy Conversion, 21(1), 27-33.[Cross Ref]
    [26] Sawhney, A. K., & Chakrabarti, A. (2006). Electrical machine design. DhanpatRai and Co.[Cross Ref]

Sudhir Kumar Sharma and Manpreet Singh Manna (2022), Finite Element Electromagnetic Based Design of Universal Motor for Agro Application. IJEER 10(3), 590-596. DOI: 10.37391/IJEER.100330.