FOREX Press I. J. of Electrical & Electronics Research
Support Open Access
  • Home/
  • IJEER-110239

Research Article |

A New Closed Loop Constant v/f Control of Induction Motor with Torque Control Based on DPWM

Author(s): E. Nandhini1* and A. Sivaprakasam2

Published In : International Journal of Electrical and Electronics Research (IJEER)        Volume 11, Issue 2

Publisher : FOREX Publication

Published : 30 June 2023

e-ISSN : 2347-470X

Page(s) : 523-528

DOI: https://doi.org/10.37391/ijeer.110239

Abstract

An easy sensor-less scalar control algorithm is described in this article as a method for controlling the speed of an induction motor. For developing a closed-loop v/f control of the induction motor drive, a torque controller with PI is implemented. The torque command was estimated by utilizing the voltage command, the feedback current, and a torque estimator. Additionally, a torque reference was provided for the Torque PI controller. Considering this, the purpose of this work is to investigate the closed-loop PI-based torque control of an induction motor drive that applies DPWM. In addition to this, it provides a description of a PI-based closed-loop torque control that works in conjunction with v/f control and tries to discover the most effective method for driving an induction motor based on an examination of Total Harmonic Distortion (THD) and torque ripple. To evaluate the performance studies of open- and closed-loop strategies with DPWM techniques for induction motor driving, the MATLAB/Simulink environment has been deployed. Experimental results have been validated.

Keywords: Discontinuous PWM, Voltage source inverter, Variable frequency drives, two level inverter, SVPWM.




E. Nandhini*, Research Scholar, College of Engineering Guindy, Anna University, Chennai, India; Email: nandhini3189@yahoo.com

A. Sivaprakasam, Associate Professor, College of Engineering Guindy, Anna University, Chennai, India

    [1] A. Goedtel, I. N. da Silva, and P. J. A. Serni, “Load torque identification in induction motor using neural networks technique,” Elect. Power Syst. Res., vol. 77, no. 1, pp. 35–45, Jan. 2007. [Cross Ref]
    [2] B. Lu, T. G. Habetler, and R. G. Harley, “A survey of efficiency-estimation methods for in-service induction motors,” IEEE Trans. Ind. Appl., vol. 42, no. 4, pp. 924–933, Jul./Aug. 2006. [Cross Ref]
    [3] D. Shi, P. J. Unsworth, and R. X. Gao, “Sensor less speed measurement of induction motor using Hilbert transform and interpolated fast Fourier transform,” IEEE Trans. Instrum. Meas., vol. 55, no. 1, pp. 290–299, Feb. 2006. [Cross Ref]
    [4] S. Maiti, C. Chakraborty, Y. Hori, and M. C. Ta, “Model reference adaptive controller-based rotor resistance and speed estimation techniques for vector-controlled induction motor drive utilizing reactive power,” IEEE Trans. Ind. Electron., vol. 55, no. 2, pp. 594–601, 2008. 760 IEEE TRANSACTIONS ON INDUSTRIAL ELECTRONICS, VOL. 58, NO. 3, MARCH 2011. [Cross Ref]
    [5] B. Singh, G. Bhuvaneswari, and B. Garg, “Harmonic mitigation in AC–DC converters for vector-controlled induction motor drives,” IEEE Trans. Energy Convers., vol. 22, no. 3, pp. 637–646, Sep. 2007. [Cross Ref]
    [6] B. Karanayil, M. F. Rahman, and C. Grantham, “Online stator and rotor resistance estimation scheme using artificial neural networks for vector-controlled speed sensorless induction motor drive,” IEEE Trans. Ind. Electron., vol. 54, no. 1, pp. 167–176, Feb. 2007. [Cross Ref]
    [7] A. Paladugu and B. H. Chowdhury, “Sensorless control of inverter-fed induction motor drives,” Elect. Power Syst. Res., vol. 77, no. 5/6, pp. 619– 629, Apr. 2007. [Cross Ref]
    [8] F. Zidani, D. Diallo, M. E. H. Benbouzid, and R. N. Saïd, “A fuzzy-based approach for the diagnosis of fault modes in a voltage-fed PWM inverter induction motor drive,” IEEE Trans. Ind. Electron., vol. 55, no. 2, pp. 586– 593, Feb. 2008. [Cross Ref]
    [9] M. N. Uddin, Z. R. Huang, and M. I. Chy, “A simplified self-tuned neurofuzzy controller-based speed control of an induction motor drive,” in Proc. IEEE Power Eng. Soc. Gen. Meet., 2007, pp. 1–8. [Cross Ref]
    [10] E. Bim, “Fuzzy optimization for rotor constant identification of an indirect FOC induction motor drive,” IEEE Trans. Ind. Electron., vol. 48, no. 6, pp. 1293–1295, Dec. 2001. [Cross Ref]
    [11] P. P. Cruz and J. P. S. Paredes, “Artificial intelligence applications in direct torque control,” in Proc. 5th Int. Conf. PEDS, 2003, vol. 2, pp. 1208–1212.
    [12] A. Tae-Chon, K. Yang-Won, H. Hyung-Soo, and W. Pedricz, “Design of neuro-fuzzy controller on DSP for real-time control of induction motors,” in Proc. IFSA World Congr., 20th NAFIPS Int. Conf., 2001, vol. 5, pp. 3038–3043. [Cross Ref]
    [13] N. Islam, M. Haider, and M. B. Uddin, “Fuzzy logic enhanced speed control system of a VSI-fed three phase induction motor,” in Proc. 2nd Int. Conf. Elect. Electron. Eng., 2005, pp. 296–301. [Cross Ref]
    [14] G. El-Saady, A. M. Sharaf, A. Makky, M. K. Sherbiny, and G. Mohamed, “A high performance induction motor drive system using fuzzy logic controller,” in Proc. 7th Mediterranean Electrotech. Conf., 1994, vol. 3, pp. 1058–1061. [Cross Ref]
    [15] R. Krishnan, Electric Motor Drives—Modeling, Analysis, and Control. Upper Saddle River, NJ: Prentice-Hall, 2001.
    [16] I. Leon, S. Kouro, L. G. Franquelo, J. Rodriguez, and B. Wu, “The essential role and the continuous evolution of modulation techniques for voltage-source inverters in the past, present, and future power electronics,” IEEE Trans. Ind. Electron, Vol. 63, no. 5, pp. 2688–2701, 2016. [Cross Ref]
    [17] Nandhini, E., &Sivaprakasam, A. (2020). A Review of Various Control Strategies Based on Space Vector Pulse Width Modulation for the Voltage Source Inverter. IETE Journal of Research, 1-15. [Cross Ref]
    [18] G. Handley, and J. T. Boys, “Practical real-time PWM modulators: An assessment,” IEE Proc. B-Electric Power Appl., Vol. 139, no. 2, IET, 1992. [Cross Ref]
    [19] A. M. Hava, R. J. Kerkman, and T. A. Lipo, “A high performance generalized discontinuous PWM algorithm,” IEEE Trans. Ind. Appl., Vol. 34, no. 5, pp. 1059–1071, 1998. [Cross Ref]
    [20] K. Taniguchi, Y. Ogino, and H. Irie, “PWM technique for power MOSFET inverter,” IEEE Trans. Power Electron., Vol. 3, no. 3, pp. 328–334, 1988. [Cross Ref]
    [21] A. Sivaprakasam& E. Nandhini (2021): 30° Discontinuous PWM-Based Closed Loop Volts/Hz Control of Induction Motor Drive with Slip Regulation, IETE Journal of Research, DOI: 10.1080/03772063.2021.2004457. [Cross Ref]
    [22] Narayanan, G., & Ranganathan, V. T. (2000). Triangle-comparison approach and space vector approach to pulse width modulation in inverter fed drives. Journal of the Indian Institute of Science, 80, 409-427.
    [23] Das, S., Hari, V. P. K., Kumar, A., & Narayanan, G. (2019). Analysis of generalized continual-clamp and split-clamp PWM schemes for induction motor drive. Sādhanā, 44(2), 36. [Cross Ref]
    [24] Narayanan, G., Krishnamurthy, H. K., Zhao, D., &Ayyanar, R. (2006). Advanced bus clamping PWM techniques based on space vector approach. IEEE Transactions on Power Electronics, 21(4), 974-984. [Cross Ref]
    [25] Nair, M. D., Biswas, J., Vivek, G., &Barai, M. (2017). Performance Evaluation of Various Bus Clamped Space Vector Pulse Width Modulation Techniques. Journal of Power Electronics, 17(5), 1244-1255. [Cross Ref]
    [26] H. V. D. Broeck, H. C. Skudelny, and G. Stanke, “Analysis and realization of a pulse width modulator based on voltage space vectors,” IEEE Trans. Ind. Appl, Vol. 24, no. 1, pp. 142–150, Jan/Feb. 1988. 18. [Cross Ref]
    [27] G. Narayanan, and V. T. Ranganathan, “Synchronised PWM strategies based on space vector approach. Part 1: Principles of waveform generation,” Proc. Inst. Elect. Eng., Vol. 146, no. 3, pp. 267–275, May. 1999. [Cross Ref]
    [28] D. Zhao, G. Narayanan, and R. Ayyanar, “Switching loss characteristics of sequences involving active state division in space vector based PWM,” Proc. IEEE APEC, Vol. 04, pp. 479–485, Feb. 2004. [Cross Ref]
    [29] Hafeez, M., Uddin, M. N., Rahim, N. A., & Hew, W. P. (2014). Self-tuned NFC and adaptive torque hysteresis-based DTC scheme for IM drive. IEEE Transactions on Industry Applications, 50, 1410–1420. [Cross Ref]
    [30] El Ouanjli, Najib, et al. "Modern improvement techniques of direct torque control for induction motor drives-a review." Protection and Control of Modern Power Systems 4.1 (2019): 1-12. [Cross Ref]
    [31] Arumugam, Sivaprakasam&Manigandan, Thathan. (2014). A Novel Method to Minimize Torque Ripple, Mechanical Vibration, and Noise in a Direct Torque Controlled Permanent Magnet Synchronous Motor Drive. International Journal of Acoustics and Vibrations. 19. 179-189. 10.20855/ijav.2014.19.3351. [Cross Ref]
    [32] Kathiresan, J., &Jothimani, G. High Gain Converter Design and Implementation for Electric Vehicles .International Journal of Electrical and Electronics Research (IJEER)Volume 10, Issue 4 | Pages 262-271 | e-ISSN: 2347-470X. [Cross Ref]

E. Nandhini and A. Sivaprakasam (2023), A New Closed Loop Constant v/f Control of Induction Motor with Torque Control Based on DPWM. IJEER 11(2), 523-528. DOI: 10.37391/IJEER.110239.