f Comparison of SoC in Ni-MH and Lithium-Ion Battery for E-Vehicle
FOREX Press I. J. of Electrical & Electronics Research
Support Open Access
  • Home/
  • IJEER-120417

Review Article |

Comparison of SoC in Ni-MH and Lithium-Ion Battery for E-Vehicle

Author(s): N Chinna Alluraiah*, V. Nandagopal, P. Veeramanikandan, Godfrey D, S. Meena and G. Brindha

Published In : International Journal of Electrical and Electronics Research (IJEER)        Volume 12, Issue 4

Publisher : FOREX Publication

Published : 30 November 2024

e-ISSN : 2347-470X

Page(s) : 1258-1263

DOI: https://doi.org/10.37391/IJEER.120417

Abstract

The current energy side of the battery is indicating in a percentage level is called state of charge (SOC). Nickel-metal hydride and lithium-ion batteries are a type of rechargeable battery. The chemical response at the positive electrode in nickel-metal hydride (NiMH) batteries is like that in nickel-cadmium (NiCd) batteries, as both use nickel oxide hydroxide NiO(OH). However, while NiCd cells use cadmium, NiMH batteries feature a hydrogen-absorbing alloy in their negative electrodes. NiMH batteries provide two to three times the capacity and a significantly higher energy density compared to NiCd batteries of the same size. The research was mainly focused on the aspect of SoC of Ni-MH and Lion batteries with operation of an electric vehicle with total weights of 600 kg was investigated using MATLAB/Simulink.

Keywords: SoC, Nickel–metal hydride battery, Lion battery, Electric vehicle, MATLAB Simulink.




N Chinna Alluraiah*, Department of Electrical and Electronics Engineering, Annamacharya University, Rajampet, Andhra Pradesh, India; Email: nandhu050577@gmail.com

V. Nandagopal, Department of Electrical and Electronics Engineering, School of Engineering, Mohan Babu University, Tirupati, Andhra Pradesh, India

P. Veeramanikandan, Department of Electrical and Electronics Engineering, Dhanalakshmi Srinivasan college of Engineering and Technology, Mahabalipuram, Chennai, Tamil Nadu, India

Godfrey D, Department of Electronics and Communication Engineering, Dayananda Sagar University, Bengaluru, Karnataka, India

S. Meena, Department of Electronics and Instrumentation Engineering, St.Josephs's College of Engineering, Chennai, India

G. Brindha, Department of Computer Science and Engineering, St. Joseph's College of Engineering, Chennai,India

    [1] Brooke L, not dead yet: The resilient ICE looks to 2050, Automotive Engineering, vol.5(4), 2018, 22–23.
    [2] M. B Smith and J. Castellano, Costs associated with non-residential electric vehicle supply equipment, U.S. Department,of Energy, Atlanta, Bost, 2015.
    [3] Delucchi M,Yang C,Burke A,Ogden J,Kurani K,Kessler J, An assessment of electric vehicles: technology, infrastructure requirements ,greenhouse-gas emissions, petroleum use, material use, life time cost, consumer acceptance and policy initiatives.Philos TransR Soc A 2014;372:203–25.
    [4] Mariasiu F. Energy Sources Management and Future Automotive Technologies: Environmental Impact. IntJ Energy Econ Policy 2012; 2:342–7.
    [5] Varga BO.Energy management of electric and hybrid vehicles dependent on power train configuration. Cent Eur JEng 2012; 2:253–63.
    [6] Damiani L,Repetto M,Prato AP. Improvement of power train efficiency through energy breakdown analysis.ApplEnergy2014;121:252–63.
    [7] Sutikno T,Idris NRN,Jidin A.A review of direct torque control of induction motors for sustainable reliability and energy efficient drives. Renew Sustain Energy Rev 2014; 32:548–58.
    [8] Sergio Manzetti, Florin Mariasiu,"Electric vehicle battery technologies: From present state to future systems"Renewable and Sustainable Energy Reviews,51,(2015),1004–1012.
    [9] Marcin Noga,Zdzislaw Juda,"The application of NIMH batteries in a light-duty electric vehicle",TECHNICAL TRANSACTIONS 1/2019,MECHANICS,197-221,DOI: 10.4467/2353737XCT.19.014.10054.
    [10] Umapathi Krishnamoorthy, Parimala Gandhi Ayyavu, Hitesh Panchal, Dayana Shanmugam,Sukanya Balasubramani, Ali Jawad Al-rubaie, Ameer Al-khaykan, Ankit D. Oza, Sagram Hembrom,Tvarit Patel, Petrica Vizureanuand Diana-Petronela Burduhos-Nergis,"Efficient Battery Models for Performance Studies-Lithium Ion and Nickel Metal Hydride Battery",Batteries , Vol.9 ,pp.1- 14,2023,https://doi.org/10.3390/batteries9010052
    [11] Ourici A (2023) Battery Technologies Comparison for Electric Vehicles. Indian Journal of Science and Technology 16(20):1461-1468. https://doi.org/10.17485/IJST/v16i20.2221.
    [12] BU-107: Comparison Table of Secondary Batteries, https://batteryuniversity.com/learn/article/secondary_batteries (access: 15.05.2018).
    [13] Vignesh, R.; Ashok, B. Intelligent energy management through neuro-fuzzy based adaptive ECMS approach for an optimal battery utilization in plugin parallel hybrid electric vehicle. Energy Convers. Manag. 2023, 280, 116792.
    [14] Ibrahim, M.A.; Alsammak, A.N. Dynamic Modelling and Current Control for Switched Reluctance Motor Drives in Electric Vehicles. IOP Conf. Ser. Mater. Sci. Eng. 2023, 1295, 012006.
    [15] Tang, X.; Liu, B.; Gao, F. State of charge estimation of lifepo4 battery based on a gain-classifier observer. Energy Procedia 2017, 105, 2071–2076, https://doi.org/10.1016/j.egypro.2017.03.585.
    [16] Fleischer, C.; Waag, W.; Bai, Z.; Sauer, D.U. Adaptive on-line state of available power prediction of lithium-ion batteries. J. Power Electron. 2013, 13, 516–527.https://doi.org/10.6113/JPE.2013.13.4.516.
    [17] Wu B, Chen C, Danilov DL, Eichel RA, Notten PHL. All-Solid-State Thin Film Li-Ion Batteries. New Challenges, New Materials, and New Designs Batteries.2023;9(186). https://doi.org/10.3390/batteries9030186.
    [18] Schmidt-Rohr K. How Batteries Store and Release Energy: Explaining Basic Electrochemistry. Journal of Chemical Education. 2018;95(10):1801– 810. https://doi.org/10.1021/acs.jchemed.8b00479.
    [19] Kim J, Oh J, Lee H. Review on battery thermal management system for electric vehicles. Applied Thermal Engineering. 2019; 149:192–212. https://doi.org/10.1016/j.applthermaleng.2018.12.020.
    [20] Luo W., Zhu S., Gong J., Zhou Z., Research and Development of Fire Extinguishing Technology for Power Lithium Batteries, Procedia Engineering, vol. 211, 2018, 531–537, 10.1016/j.proeng.2017.12.045.
    [21] Markel T., Brooker A., Hendricks T., Johnson V., Kelly K., Kramer B., O’Keefe M., Sprik S., Wipke K., ADVISOR: A systems analysis tool for advanced vehicle modeling,J of Power Sources, vol. 110(2), 2002, 255-266, 10.1016/s0378-7753(02)00189-1.
    [22] Shin J.W., Kim J.O., Choi J.Y., Oh S.H., Design of 2-speed transmission for electric commercial vehicle, International Journal of Automotive Technology, vol. 15(1), 2014, 145–150,10.1007/s12239-014-0016-8.
    [23] Slaski G., Ohde B., A statistical analysis of energy and power demand for the tractive purposes of an electric vehicle in urban traffic – an analysis of a short and long observation period, IOP Conf. Ser.: Mater. Sci. Eng., vol. 148, 2016, 012027, 10.1088/1757-899X/148/1/012027.
    [24] Young K.H., Ng K.Y.S., Bendersky L.A., A Technical Report of the Robust Affordable Next Generation Energy Storage System-BASF Program, Batteries, vol. 2(1), 2016, 2, 10.3390/batteries2010002.
    [25] Zhu J.H., Liu C.T., Pike L.M., Liaw P.K., A thermodynamic interpretation of the size-ratio limits for laves phase formation, Metallurgical and Materials Transactions A, vol. 30(5), 1999, 1449–1452, 10.1007/s11661-999-0292-5.

N Chinna Alluraiah, V. Nandagopal, P. Veeramanikandan, Godfrey D, S. Meena and G. Brindha (2024), Comparison of SoC in Ni-MH and Lithium-Ion battery for E Vehicle. IJEER 12(4), 1258-1263. DOI: 10.37391/IJEER.120417.