Research Article |
Performance Analysis of Tera Hertz Frequencies on Intelligent Reflecting Surfaces for 6G Communications
Author(s): Yegireddi Satya Vinod1, Thoram Saran Kumar2, K. Baboji3, V Venkata Lakshmi Dadala4, K. Kalyani5*, Venkata Ramana Kammampati6, U. S. B. K. Mahalaxmi7
Published In : International Journal of Electrical and Electronics Research (IJEER) Volume 13, Issue 2
Publisher : FOREX Publication
Published : 30 June 2025
e-ISSN : 2347-470X
Page(s) : 319-324
Abstract
The rapid advancements toward 6G networks have powered interest in the terahertz (THz) frequency band due to its potential for delivering ultra-high data rates. It provides massive connectivity. However, THz communication faces significant challenges. It includes high path loss, molecular absorption and blockage sensitivity. These are severely degrading signal quality over distance. Intelligent reflecting surfaces (IRS) emerged as a promising solution to address these issues. IRSs reflect and direct signals to desired locations. This improves communication quality. It does not require extra power sources. In this study, we look at how different factors affect performance. These factors include the distance between the transmitter and IRS, transmit power, number of IRS elements, LoS/NLoS path-loss ratio, number of transmit antennas and frequency in the THz band. We find the best configurations for IRS-aided THz systems. Using pathloss and channel models, measure spectral efficiency and achievable rate. This helps identify key factors for improving system efficiency and reliability. Using more IRS elements improves signal quality and data rates. With every 100 added elements (up to 700), data rates increase by 20–30%. After 700 elements, the improvements become smaller. This shows the need to choose a balanced IRS size for best performance. The results show that the distance between the transmitter and IRS affects spectral efficiency. Closer IRS placements improve efficiency.
Keywords: 6G
, Beamforming
, BER
, IRS
, NLoS
, LoS
, Terahertz
.
Yegireddi Satya Vinod,Department of Electronics and Communication Engineering, Bonam Venkata Chalamayya Engineering College(A), Odalarevu; India; Email: satyavinod55@gmail.com
Thoram Saran Kumar,Department of Electronics and Communication Engineering, Bonam Venkata Chalamayya Engineering College(A), Odalarevu, India; Email: saran.thoram455@gmail.com
K. Baboji ,Dept of Electronics and Communication Engineering, Sri Vasavi Engineering college, Tadepalligudem, Andhra Pradesh, India; Email: baboji.ece@srivasaviengg.ac.in
V Venkata Lakshmi Dadala ,Dept of Electronics and Communication Engineering, Pragati Engineering College (A), Surampalem, Andhra Pradesh, India; Email: lakshmi.dvv@gmail.com
K. Kalyani ,Department of Electronics and Communication Engineering, Aditya University, Surampalem, India; Email: kalyani.kapula@gmail.com
Venkata Ramana Kammampati ,Department of Electronics and Communication Engineering, Aditya University, Surampalem, India; Email: venkat.ramana489@gmail.com
U. S. B. K. Mahalaxmi, Dept of Electronics and Communication Engineering, Aditya University, Surampalem, India; Email: aumahalakshmi@gmail.com
-
[1] M. Liu, T. Lin, Y. Zhu, and Y.-J. A. Zhang, “Sparse channel estimation for irs-assisted millimeter wave MIMO-OFDM systems,” IEEE Transactions on Communications, p. 1–1, 2024.
-
[2] A. J. Chinchawade, S. Rajyalaxmi, S. Singh, R. A. Kumar, R. Rastogi, and M. A. Shah, “Scheduling in multi-hop wireless networks using a distributed learning algorithm,” in 2023 7th International Conference on Trends in Electronics and Informatics (ICOEI), pp. 1013–1018, IEEE, 2023.
-
[3] H.-Y. Chen, M.-H. Wu, T.-W. Yang, C.-W. Huang, and C.-F. Chou, “Attention-aided autoencoder-based channel prediction for intelligent reflecting surface-assisted millimeter-wave communications,” IEEE Transactions on Green Communications and Networking, vol. 7, no. 4, p. 1906 – 1919, 2023.
-
[4] T. Dheerajlal and A. K. Dutta, “Wideband mimo thz system design with mb-ofdm waveform and hybrid beamforming,” IEEE Open Journal of the Communications Society, vol. 5, p. 4823 –4838, 2024.
-
[5] H.-Y. Chen, M.-H. Wu, T.-W. Yang, J.-W. Liao, C.-W. Huang, and C.-F. Chou, “Intelli- gent reflecting surface enhanced wireless communications with multihead-attention sparse autoencoder-based channel prediction,” IEEE Communications Letters, vol. 27, no. 10, p. 2757 – 2761, 2023.
-
[6] T.-H. Chou, N. Michelusi, D. J. Love, and J. V. Krogmeier, “Compressed training for dual-wideband time-varying sub-terahertz massive MIMO,” IEEE Transactions on Communications, vol. 71, no. 6, p. 3559 – 3575, 2023.
-
[7] N. Fernando, Y. Hong, and E. Viterbo, “MIMO self-heterodyne OFDM,” IEEE Transactions on Vehicular Technology, vol. 65, no. 3, p. 1271 – 1280, 2016.
-
[8] F. Gao, L. Xu, and S. Ma, “Integrated sensing and communications with joint beam-squint and beam-split for mmwave/thz massive mimo,” IEEE Transactions on Communications, vol. 71, no. 5, p. 2963 – 2976, 2023.
-
[9] C. Han, J. M. Jornet, and I. F. Akyildiz, “Ultra-massive MIMO enabled terahertz communications for indoor virtual reality applications,” IEEE Communications Magazine, vol. 57, no. 9, pp. 99–105, Sep. 2021
-
[10] R. K. Bharti, D. Suganthi, S. Abirami, R. A. Kumar, B. Gayathri, and S. Kayathri, “Optimal extreme learning machine based traffic congestion control system in vehicular network,” in 2022 6th International Conference on Electronics, Communication and Aerospace Technology, pp. 597–603, IEEE, 2022.
-
[11] U. Sreenivasulu, S. Fairooz, R. A. Kumar, S. Patchala, R. P. Kumar, and A. Rmaesh, “Joint beamforming with ris assisted mu-miso systems using HR mobilenet and aso algorithm,” Digital Signal Processing, vol. 159, p. 104955, 2025.
-
[12] M. Di Renzo, A. Zappone, M. Debbah, M.-S. Alouini, and X. Qian, “Smart radio environments empowered by AI reconfigurable meta-surfaces: An idea whose time has come,” EURASIP Journal on Wireless Communications and Networking, vol. 2020, no. 1, pp. 1–20, Dec. 2020.
-
[13] Q. Wu, R. Zhang, and S. Jin, “Beamforming optimization for intelligent reflecting surface with discrete phase shifts,” IEEE Transactions on Communications, vol. 68, no. 3, pp. 1838–1851, Mar. 2020.
-
[14] G. C. Basar, M. Di Renzo, and R. Zhang, “Reconfigurable intelligent surfaces: A signal processing perspective with wireless applications,” IEEE Signal Processing Magazine, vol. 39, no. 6, pp. 134–144, Nov. 2022.
-
[15] W. Tang, M. Z. Chen, X. Chen, J. Xu, and T. J. Cui, “Programmable metasurfaces: State of the art and prospects,” IEEE Transactions on Microwave Theory and Techniques, vol. 70, no. 2, pp. 676–699, Feb. 2022, doi: 10.1109/TMTT.2021.3125818.
-
[16] Q. Huang, J. Hu, Q. Yue, and K. Yang, “Beamforming design in intelligent reflecting surface aided multicast system in ultra-high frequency bands with large-scale antenna array,” IEEE Wireless Communications Letters, 2024.
-
[17] J. Wang and M. Kaneko, “Exploiting beam split-based multi-user diversity in terahertz mimo- ofdm systems,” IEEE Wireless Communications Letters, 2024.
-
[18] T. Mir, M. Waqas, U. Mir, S. M. Hussain, A. M. Elbir, and S. Tu, “Hybrid precoding design for two-way relay-assisted terahertz massive mimo systems,” IEEE Access, vol. 8, p. 222660 – 222671, 2020.
-
[19] S. H. Hong, J. Park, S.-J. Kim, and J. Choi, “Hybrid beamforming for intelligent reflecting surface aided millimeter wave mimo systems,” IEEE Transactions on Wireless Communications, vol. 21, no. 9, p. 7343 – 7357, 2022.