Research Article | ![]()
Miniaturized Wearable Antenna Design for Wireless Body Area Networks at 5.8 GHz
Author(s): Sivasankari Narasimhan1*, Ashwini G2, Karthika K3
Published In : International Journal of Electrical and Electronics Research (IJEER) Volume 14, Issue 1
Publisher : FOREX Publication
Published : 10 March 2026
e-ISSN : 2347-470X
Page(s) : 1-9
Abstract
Microstrip patch antennas are extensively utilized due to their strong mechanical properties, lightweight design, ease of manufacturing, and adaptability to both flat and curved surfaces. Additionally, they can support dual and triple frequency operations. For wearable applications, it is crucial to ensure that the antenna poses no harm to the human body while still performing effectively at higher frequencies. In this paper, a microstrip patch antenna was developed to operate in the 5.8 GHz ISM band, specifically targeting wearable use cases. To suit wearable environments, Teflon was chosen as the substrate material due to its low dielectric constant (εr = 2.1), which contributes to better antenna performance. Simulation results from HFSS 2024 revealed a return loss of –32.93 dB, maximum radiation intensity of 496.31 mW/sr, VSWR of 1.4562, gain of 8 dB, and directivity of 8.543 dB, with an overall efficiency of 87.8%. After fabrication, measurements showed a return loss of –30.843 dB, VSWR of 1.0562, and a measured gain of 12.4 dB. These results indicate that the proposed antenna design is not only efficient but also well-suited for wearable devices operating at 5.8 GHz.
Keywords: ISM Band, Teflon Substrate, Return Loss, VSWR, Antenna Gain, Radiation Efficiency, Directivity, Wireless Body Area Network (WBAN).
Sivasankari Narasimhan*, Department of Electronics and Communication Engineering, Mepco Schlenk Engineering College, Anna University, India; Email: sivasankari2015@mepcoeng.ac.in
Ashwini G, Department of Electronics and Communication Engineering, Mepco Schlenk Engineering College, Anna University, India; Email: ashwinig162001_ec@mepcoeng.ac.in
Karthika K, Department of Electronics and Communication Engineering, Mepco Schlenk Engineering College, Anna University, India; Email: karthikakannan2000kvp_ec@mepcoeng.ac.in
-
[1] P. S. Hall et al., 2007 “Antennas and propagation for on-body communication systems,” IEEE Antennas Propag. Mag., vol. 49, no. 3, pp. 41-58, Jun. 2007.
-
[2] C. P. Lin, C. H. Chang, Y. T. Cheng, and C. F. Jou, 2011 “Development of a flexible SU-8 PDMS-based antenna,” IEEE Antennas Wireless Propag. Lett., vol. 10, pp. 1108-1111.
-
[3] Z. H. Jiang, Z. Cui, T. Yue, Y. Zhu, and D. H. Werner,2017 “Compact, highly efficient, and fully flexible circularly polarized antenna enabled by silver nanowires for wireless body area networks,” IEEE Trans. Biomed. Circuits Syst., vol. 11, no. 4, pp. 920-932.
-
[4] C. Hertleer, H. Rogier, L. Vallozzi, and L V. Langenhove, 2009 “A textile antenna for off-body communication integrated into protective clothing for fire Fighters,” IEEE Trans. Antennas Propag., vol. 57, no. 4, pp. 919-925.
-
[5] C. Hertleer, A. Tronquo, H. Rogier, L. Vallozzi, and L. V. Langenhove, 2007 “Aperture-coupled patch antenna for integration into wearable textile systems,” IEEE Antennas Wireless Propag. Lett., vol. 6, pp. 392-395, 2007.
-
[6] Ayd R. Saad, Ayman, Walaa M. Hassan, and Ahmed A. Ibrahim. 2023. "A monopole antenna with cotton fabric material for wearable applications." Scientific Reports 13, no. 1 (2023): 7315.
-
[7] E. K. Kaivanto, M. Berg, E. Salonen, and P. D. Maagt, 2011. “Wearable circularly polarized antenna for personal satellite communication and navigation,” IEEE Trans. Antennas Propag., vol. 59, no. 12, pp. 4490-4496.
-
[8] N. M. S. Rais, P. J. Soh, M. F. A. Malek, and G. E. Vanden bosch 2013 “Dual-band suspended-plate wearable textile antenna,” IEEE Antennas Wireless Propag. Lett., vol. 12, pp. 583-586, 2013.
-
[9] Atanasova, G., & Atanasov, N. 2020. Small Antennas for Wearable Sensor Networks: Impact of the Electromagnetic Properties of the Textiles on Antenna Performance. Sensors, 20(18), 5157.
-
[10] P. Soontornpipit, C. M. Furse and You Chung Chung, 2005 "Miniaturized biocompatible microstrip antenna using genetic algorithm," in IEEE Transactions on Antennas and Propagation, vol. 53, no. 6, pp. 1939-1945.
-
[11] C. Liu, Y. -X. Guo and S. Xiao. 2012 “Compact Dual-Band Antenna for Implantable Devices," in IEEE Antennas and Wireless Propagation Letters, vol. 11, pp. 1508-1511.
-
[12] P. Soontornpipit, C. M. Furse and You Chung Chung, 2004. "Design of implantable microstrip antenna for communication with medical implants," in IEEE Transactions on Microwave Theory and Techniques, vol. 52, no. 8, pp. 1944-1951.
-
[13] D. H. Werner and Z. H. Jiang, 2016 Electromagnetics of Body Area Networks: Antennas, Propagation, and RF Systems, Wiley-IEEE Press.
-
[14] P. Salonen, and Y. Rahmat-Samii, 2015 “Textile antennas: Effects of antenna bending on input matching and impedance bandwidth,” IEEE A&E Systems Magazine., vol. 22, no. 12, pp. 18-22.
-
[15] Z. Wang, L. Lee, D. Psychoudakis, and J. Volakis.2014 “Embroidered multiband body-worn antenna for GSM PCS WLAN communications,” IEEE Trans. Antennas Propag., vol. 62, no. 6, pp. 3321-3329, Jun. 2014.
-
[16] J. Tak, Y. Hong, and J. Choi,2015 “Textile antenna with EBG structure for body surface wave enhancement,” Electron. Lett., vol. 51, pp. 1131-1132.
-
[17] A. Paraskevopoulos, D. S. Fonseca, R. D. Seager, W. G. Whittow, J. C. Vardaxoglou, and A. A. Alexandridis, 2016 “Higher-mode textile patch antenna with embroidered vias for on-body communication,” IET Microw. Antennas Propag., vol. 10, no. 7, pp. 802-807.
-
[18] Anand Swaminathan, Josephine Pon Gloria Jeyaraj, Ahila G, Afrin A, 2020 “RCS reduction using a wideband dual logarithmic step patch PRRM in microstrip patch antenna”, Microwave and Optical technology Letters, VOL. 63, Issue 1.
-
[19] G. Indumathi and Bhavithra J. 2017. "Wearable textile antenna for indoor applications," 2017 International Conference on Inventive Communication and Computational Technologies (ICICCT), 2017, pp. 30-34.
-
[20] Anand, S. and Palniladevi, P. 2020 ‘Dynamic enhanced proximity coupling technique for antennas’, Int. J. Wireless and Mobile Computing, Vol. 18, No. 3, pp.233–241.
-
[21] R. M. Kingsta and Seyatha K 2019."Design and Performance Comparison of Metamaterial Superstrate Antenna for DSRC Applications," 2019 3rd International Conference on Trends in Electronics and Informatics (ICOEI), 2019, pp. 1-6.
-
[22] V. Renuga Kanni and R. Brinda, 2019. "Design of High Gain Microstrip Antenna for Vehicle-to-Vehicle Communication Using Genetic Algorithm," Progress in Electromagnetics Research M, Vol. 81, 167-179.
-
[23] Viswanadha, K., Raghava, N.S. 2020 “Design and Analysis of a Compact Dual-Band Serpentine-Shaped Patch Antenna with Folded Stub Lines for C- and X-Band Applications. J. Commun. Technol. Electron. 65, 1147–1160.
-
[24] Ghasemlouy, A., Rajebi. 2019. S. Investigation and Evaluation of the Effect of Silicon Layer and Its Comparison with Water Bolus in Designing Microstrip Antenna for Hyperthermia Applications. J. Commun. Technol. Electron. 64, 1307–1317.
-
[25] Kushwaha, R., Chauhan, R.K. 2019. “Dual Band Slotted Patch Microstrip Antenna Array Design for K Band Application” In: Verma, S., Tomar, R., Chaurasia, B., Singh, V., Abawajy, J. (eds) Communication, Networks and Computing. CNC 2018. Communications in Computer and Information Science, vol 839. Springer, Singapore.
-
[26] Yadav, R., Mishra, R. 2020. Microstrip Patch Antenna Array for UWB Application. In: Janyani, V., Singh, G., Tiwari, M., d’Alessandro, A. (eds) Optical and Wireless Technologies. Lecture Notes in Electrical Engineering, vol 546. Springer, Singapore.
-
[27] Prajapati, M.S., Rawat, A., Parikh, R., Joshi, P. 2019. “Analysis of Impact of Circular Cut on Microstrip Patch Antenna at 2.49 GHz for S Band Application. In: Nath, V., Mandal, J. (eds) Proceedings of the Third International Conference on Microelectronics, Computing and Communication Systems. Lecture Notes in Electrical Engineering, vol 556. Springer, Singapore.

I. J. of Electrical & Electronics Research