Research Article |
Investigation of Electromagnetic Shielding for Wire Mesh Composite for Aircraft against Lightning Strike
Author(s): Siva Chakra Avinash Bikkina1* and Pappu. V. Y. Jayasree2
Published In : International Journal of Electrical and Electronics Research (IJEER) Volume 11, Issue 2
Publisher : FOREX Publication
Published : 30 May 2023
e-ISSN : 2347-470X
Page(s) : 353-358
Abstract
Nowadays, fly-wire is only used for flying-related things. All plane controls depend on electronics, but they also must deal with high-intensity radiated fields. This equipment might need an electromagnetic shield to protect it from outside electromagnetic pollution. The current work aims to develop a mesh around the operating equipment to protect and make it work better. AL6061 was used to create a shield with a metal matrix composite. Here three combinations of Metal Matrix Composite (MMCs) were considered to protect from the high-intensity radiated fields. These MMCs are AL6061+10%Al_2 O_3+5% FA (MMC-1), AL6061+15% Al_2 O_3+5% FA (MMC-2), and AL6061+20% Al_2 O_3+5% FA (MMC-3) made the process of shielding more effective at different percentages. Explements are Measures that take the electrical characteristics, and they are by Shielding Effectiveness (SE) of different concentrations of fly ash and Al_2 O_3.SE of 50 dB is achieved; hence these MMCs can be used in aircraft and other applications as a shield.
Keywords: AL6061
, Electromagnetic Shielding
, high intensity radiated fields and mesh
.
Siva Chakra Avinash Bikkina*, Research Scholar, Department of Electrical Electronics and Communication Engineering, GITAM School of Technology, Visakhapatnam, India; Email: ysbikkina@gitam.in
Pappu. V. Y. Jayasree, Professor, Department of Electrical Electronics and Communication Engineering, GITAM School of Technology, Visakhapatnam, India; Email: jpappu@gitam.edu
-
[1] Larsson, Anders. "The interaction between a lightning flash and an aircraft in flight." Comptes Rendus Physique 3.10 (2002): 1423-1444. https://doi.org/10.1016/S1631-0705(02)01410-X. [Cross Ref]
-
[2] Guo, Yunli, et al. "Eliminating lightning strike damage to carbon fiber composite structures in Zone 2 of aircraft by Ni-coated carbon fiber nonwoven veils." Composites Science and Technology 169 (2019): 95-102. https://doi.org/10.1016/j.compscitech.2018.11.011. [Cross Ref]
-
[3] Kumar, Vipin, et al. "Interleaved MWCNT buckypaper between CFRP laminates to improve through-thickness electrical conductivity and reducing lightning strike damage." Composite Structures 210 (2019): 581-589. https://doi.org/10.1016/j.compstruct.2018.11.088. [Cross Ref]
-
[4] Kawakami, Hirohide, and Paolo Feraboli. "Lightning strike damage resistance and tolerance of scarf-repaired mesh-protected carbon fiber composites." Composites Part A: Applied Science and Manufacturing 42.9 (2011): 1247-1262. doi.org/10.1016/j.compositesa.2011.05.007. [Cross Ref]
-
[5] Wu, Nannan, et al. "Recent development in fabrication of Co nanostructures and their carbon nanocomposites for electromagnetic wave absorption." Engineered Science 13.19 (2020): 11-23.
-
[6] Gagné, Martin, and Daniel Therriault. "Lightning strike protection of composites." Progress in Aerospace Sciences 64 (2014): 1-16. [Cross Ref]
-
[7] Von Klemperer, Christopher J., and Denver Maharaj. "Composite electromagnetic interference shielding materials for aerospace applications." Composite Structures 91.4 (2009): 467-472. [Cross Ref]
-
[8] Liang, Jiajie, et al. "Electromagnetic interference shielding of graphene/epoxy composites." Carbon 47.3 (2009): 922-925. [Cross Ref]
-
[9] Zhao, Dong, et al. "Complex permittivity and microwave‐absorbing properties of Fe/Al2O3 coatings by air plasma spraying technique." International Journal of Applied Ceramic Technology 10 (2013): E88-E97. [Cross Ref]
-
[10] Xie, Peitao, et al. "Hierarchically porous Co/C nanocomposites for ultralight high-performance microwave absorption." Advanced Composites and Hybrid Materials 4.1 (2021): 173-185.
-
[11] Bikkina, Siva Chakra Avinash, and Pappu VY Jayasree. "Development of a Wire Mesh Composite Material for Aerospace Applications." Engineering, Technology & Applied Science Research 12.5 (2022): 9310-9315. [Cross Ref]
-
[12] Manimaran, R., et al. "Mechanical properties of fly ash composites—A review." Energy Sources, Part A: Recovery, Utilization, and Environmental Effects 40.8 (2018): 887-893. [Cross Ref]
-
[13] Lingvay, Daniel, et al. "Fly ash for increased electromagnetic protection of constructions." Electrotehnica, Electronica, Automatica 66.2 (2018): 76-80.
-
[14] Rajesh, A. M., Saleemsab Doddamani, and K. N. Bharath. "Dry sliding wear simulation of hybrid aluminum metal matrix composites." Advanced Composites and Hybrid Materials 3.1 (2020): 120-126. [Cross Ref]
-
[15] Budumuru, Srinu, and Satya Anuradha Mosa. "Analysis of shielding effectiveness and mechanical properties of metal matrix composite AL6061 reinforced with Al2O3 and fly ash for oblique incidence of EM wave." International Journal of Intelligent Computing and Cybernetics (2021). [Cross Ref]
-
[16] Budumuru, Srinu, and M. Satya Anuradha. "Electromagnetic shielding and mechanical properties of AL6061 metal matrix composite at X-band for oblique incidence." Advanced Composites and Hybrid Materials 4.4 (2021): 1113-1121. [Cross Ref]
-
[17] L. Zhou et al., "Dielectric properties and electromagnetic interference shielding effectiveness of Al2O3-based composites filled with FeSiAl and flaky graphite," Journal of Alloys and Compounds, vol. 829, Jul. 2020, Art. no. 154556, https://doi.org/10.1016/j.jallcom.2020.154556. [Cross Ref]
-
[18] Bikkina, Siva Chakra Avinash, and P. V. Y. Jayasree. "Estimation of electromagnetic shielding properties of wire mesh with AL6061 composite material for oblique incidence." (2022). [Cross Ref]
-
[19] Vani, Vemula Vijaya, and Sanjay Kumar Chak. "The effect of process parameters in aluminum metal matrix composites with powder metallurgy." Manufacturing Review 5 (2018): 7. [Cross Ref]
-
[20] Pitchayyapillai, G., et al. "Al6061 hybrid metal matrix composite reinforced with alumina and molybdenum disulphide." Advances in Materials Science and Engineering 2016 (2016). [Cross Ref]
-
[21] Dey, Abhijit, and Krishna Murari Pandey. "Characterization of fly ash and its reinforcement effect on metal matrix composites: A review." Rev. Adv. Mater. Sci 44.2 (2016): 168-181.
-
[22] Dou, Zuoyong, et al. "Electromagnetic shielding effectiveness of aluminum alloy–fly ash composites." Composites Part A: Applied Science and Manufacturing 38.1 (2007): 186-191. [Cross Ref]
-
[23] Senapati, Ajit Kumar, Purna Chandra Mishra, and Bharat Chandra Routara. "Use of waste flyash in fabrication of aluminium alloy matrix composite." Int. J. Eng. Technol 6.2 (2014): 905-912. [Cross Ref]
-
[24] Budumuru, Srinu, and M. Satya Anuradha. "Electromagnetic shielding and mechanical properties of al6061 metal matrix composite at x-band for oblique incidence." Advanced Composites and Hybrid Materials 4.4 (2021): 1113-1121. [Cross Ref]
-
[25] Hasar, Ugur Cem. "Permittivity measurement of thin dielectric materials from reflection-only measurements using one-port vector network analyzers." Progress in Electromagnetics Research 95 (2009): 365-380. [Cross Ref]
-
[26] Alegaonkar, Ashwini P., and Prashant S. Alegaonkar. "Nanocarbons: preparation, assessments, and applications in structural engineering, spintronics, gas sensing, EMI shielding, and cloaking in X-band." Nanocarbon and its Composites. Woodhead Publishing, 2019. 171-285. [Cross Ref]
-
[27] Mansson, Daniel, and Anders Ellgardt. "Comparing analytical and numerical calculations of shielding effectiveness of planar metallic meshes with measurements in cascaded reverberation chambers." Progress in Electromagnetics Research C 31 (2012): 123-135. [Cross Ref]
-
[28] Sharma, Devesh, Ravi Kumar, and Rajesh K. Vishwakarma. "A Miniaturized Dual-Band Modified Rectangular-Shaped Antenna for Wireless Applications." IJEER 10.4 (2022): 877-880. [Cross Ref]
-
[29] Casey, Kendall F. "Electromagnetic shielding behavior of wire-mesh screens." IEEE transactions on Electromagnetic Compatibility 30.3 (1988): 298-306. [Cross Ref]
-
[30] Catarinucci, Luca, Giuseppina Monti, and Luciano Tarricone. "Metal foams for electromagnetics: experimental, numerical and analytical characterization." Progress in Electromagnetics Research B 45 (2012): 1-18. [Cross Ref]
-
[31] Kumar, YE Vasanth, K. P. Vinay, and G. Rajita. "A Multi Stub Polygon Shaped Textile Antenna for Deformation Performance Using Aperiodic DGS.”IJEER 10.4 (2022): 1233-1238. [Cross Ref]
-
[32] Boddu, Ramesh, et al. "A Switchable Filtering Antenna Integrated with U-Shaped Resonators for Bluetooth, WLAN & UWB Applications." IJEER 10.4 (2022): 1225-1232. [Cross Ref]
-
[33] Lovat, Giampiero, Paolo Burghignoli, and Salvatore Celozzi. "Shielding properties of a wire-medium screen." IEEE transactions on electromagnetic compatibility 50.1 (2008): 80-88. [Cross Ref]
-
[34] Jayasree, Pappu Vankata Yasoda, et al. "Analysis of shielding effectiveness of single, double and laminated shields for oblique incidence of EM waves." Progress in Electromagnetics Research B 22 (2010): 187-202. [Cross Ref]
-
[35] Zhao, Z. J., et al. "Development of electrically conductive structural BMI based CFRPs for lightning strike protection." Composites Science and Technology 167 (2018): 555-562. [Cross Ref]
-
[36] Zhang, Yang, Zhangjing Yang, and Bianying Wen. "An ingenious strategy to construct helical structure with excellent electromagnetic shielding performance." Advanced Materials Interfaces 6.11 (2019): 1900375. [Cross Ref]
-
[37] L. Zhu et al., "Significantly enhanced electromagnetic interference shielding in Al2O3 ceramic composites incorporated with highly aligned non-woven carbon fibers," Ceramics International, vol. 45, no. 10, pp. 12672–12676, Jul. 2019, https://doi.org/10.1016/j.ceramint.2019.03.079. [Cross Ref]