Research Article | ![]()
Random Forest-Based Early Fault Detection and Classification in DC-DC Converters Using Multi-Sensor Electrical and Thermal Features
Author(s): I. Baranilingesan1, Mallula Vijaya Krishna2, Hareesh Sita3, and E. Parimalasundar4*
Published In : International Journal of Electrical and Electronics Research (IJEER) Volume 14, Issue 3
Publisher : FOREX Publication
Published : 30 September 2026
e-ISSN : 2347-470X
Page(s) :872-881
Abstract
Intelligent condition monitoring of Direct Current (DC) to DC converters requires fault detection that is accurate, reproducible and early enough to act before conventional protection trips. This paper presents a Random Forest (RF) framework that fuses output-voltage, inductor-current and heatsink-temperature measurements of a 48 V/10 A synchronous buck converter (96 V input, 20 kHz switching, cascaded PI control). A fully specified averaged-model simulation with sensor models (10 kHz sampling) and per-run component tolerances generates 200 labelled runs (40 per class, 60 s each; 59,000 windows of 0.2 s) covering normal operation, overcurrent (13.8–15.2 A), overvoltage (55.5–59.0 V), overtemperature caused by cooling degradation, and a combined severe fault. Ten features are extracted per window, including ripple factors, ripple Total Harmonic Distortion (THD), temperature slope and a thermal-model residual. A five-class RF (128 trees, maximum depth 14) tuned by Bayesian optimisation under run-wise cross-validation achieves 97.9% accuracy and 98.1% macro-F1 on 60 independent test runs (16,843 windows), and 97.7 ± 1.4% accuracy in repeated group 5-fold cross-validation. A tuned support vector machine attains higher in-distribution accuracy (99.5%), whereas RF gives the highest mean accuracy (98.0%) under six unseen operating conditions. Fusing electrical and thermal features raises accuracy from 70.2% (electrical only) and 75.4% (thermal only) to 97.9%. With a three-window alarm rule, all 48 test faults are flagged before the conventional trip threshold is crossed, with mean lead times of 3.9 s (overcurrent), 7.5 s (overvoltage), 26.5 s (overtemperature) and 2.5 s (severe fault). A classifier-weighted Fault Severity Index (FSI) rises from 0.04 in normal operation to 2.62 under severe fault, providing a quantitative severity ranking.
Keywords: Anomaly Index, DC-DC converter, Early fault detection, Fault Severity Index, Random Forest classifier, Thermal-model residual, Sustainable Development Goal 7 (Affordable and Clean Energy), Sustainable Development Goal 9 (Industry, Innovation and Infrastructure).
I. Baranilingesan, Department of Electrical and Electronics Engineering, KPR Institute of Engineering and Technology, Coimbatore, Tamilnadu, India; Email: barani.ling@gmail.com
Mallula Vijaya Krishna, Department of Electrical and Electronics Engineering, Ballari Institute of Technology and Management, Ballari, Karnataka, India; Email: vijayakrishna@bitm.edu.in
Hareesh Sita, Department of Electrical and Electronics Engineering, Mother Theresa Institute of Engineering and Technology, Palamaner, A.P, India; Email: hareesh.seeta@gmail.com
E. Parimalasundar, Department of Electrical and Electronics Engineering, Saveetha School of Engineering, Saveetha Institute of Medical and Technical Sciences, Chennai, Tamilnadu, India; Email: parimalpsg@gmail.com
-
[1] Kim, B.; Kim, W.; Jeon, M.; Song, S.-G.; Park, H.-P. Coordination of Machine Learning and Current Modulation for DC Series Arc Fault Detection and Extinguishing for Module-Level PV Systems. IEEE Transactions on Power Electronics 2025, 40, 16061–16067.
-
[2] Chen, Z.; Wang, K.; Jiao, M.; Xiong, R. Synergistic Internal Temperature Estimation and Fault Diagnosis of Lithium-Ion Batteries via Online Sequential Extreme Learning Machine. Journal of Energy Storage 2025, 139, 118750.
-
[3] Y. Fassi, V. Heiries, J. Boutet, and S. Boisseau, “Toward Physics-Informed Machine-Learning-Based Predictive Maintenance for Power Converters—A Review,” IEEE Trans. Power Electron., vol. 39, no. 2, pp. 2692–2720, Feb. 2024.
-
[4] S. M. Antony, K. M. Sundaram, C. J. Raman, and G. R. Murthy, “Intelligent fault detection in battery systems: a machine learning approach with transformer-enhanced multi-modal Sensing,” Electric Power Systems Research, vol. 251, p. 112279, Feb. 2026.
-
[5] S. Chatterjee et al., “Fault detection of a Li-ion battery using SVM based machine learning and unscented Kalman filter,” Materials Today: Proceedings, vol. 74, pp. 703–707, 2023
-
[6] K. Suresh and E. Parimalasundar, “ITBC Controlled IPWM for Solar Based Wide Range Voltage Conversion System,” IETE Journal of Research, vol. 70, no. 4, pp. 4278–4286, Apr. 2024.
-
[7] Suresh K. and P. E., “Innovative PFM Converter Architectures with IoT Power Efficiency for Defence Application,” Def. Sc. J., vol. 76, no. 1, pp. 118–128, Jan. 2025.
-
[8] K. Liu, J. Zhou, C. Jin, P. Chen, and J. Zhao, “Artificial Intelligence-Based Open-Circuit Fault Diagnosis for Power Electronic Converters: Recent Advances and Future Prospects,” IEEE Trans. Power Electron., vol. 41, no. 3, pp. 3775–3798, Mar. 2026.
-
[9] A. Arunraja et al., “HEES-Based IFVR for Energy-Saving Application Using DC–DC Converter,” IEEE Can. J. Electr. Comput. Eng., vol. 48, no. 4, pp. 325–332, 2025.
-
[10] S. Xie, G. Dong, H. Chen, and Y. Lou, “Realistic multi-fault diagnostics of millions-scale Li-ion batteries with rapid unsupervised learning,” Cell Reports Physical Science, p. 103154, Mar. 2026.
-
[11] Y. Gao, S. Wang, T. Dragicevic, P. Wheeler, and P. Zanchetta, “Artificial Intelligence Techniques for Enhancing the Performance of Controllers in Power Converter-Based Systems—An Overview,” IEEE Open J. Ind. Applicat., vol. 4, pp. 366–375, 2023.
-
[12] M. Paramasivan, T. N. Prasad, and K. Vanchinathan, “Experimental and numerical investigations on amalgamation of mixed frequency carrier based asymmetrical 15 level multilevel inverter,” Electr Eng, vol. 107, no. 5, pp. 5861–5875, May 2025.
-
[13] Y. Wan, Q. Xu, and T. Dragičević, “Safety-Enhanced Self-Learning for Optimal Power Converter Control,” IEEE Trans. Ind. Electron., vol. 71, no. 11, pp. 15229–15234, Nov. 2024.
-
[14] M. Liao, H. Li, P. Wang, T. Sen, Y. Chen, and M. Chen, “Machine Learning Methods for Feedforward Power Flow Control of Multi-Active-Bridge Converters,” IEEE Trans. Power Electron., vol. 38, no. 2, pp. 1692–1707, Feb. 2023.
-
[15] Li, A. Khalatbarisoltani, Y. Che, Y. Yang, and X. Hu, “Data-secure and privacy-protected electric vehicle battery fault detection using decentralized federated learning with differential privacy,” Energy Storage Materials, vol. 83, p. 104681, Dec. 2025.
-
[16] K. L. Soon et al., “Synthesizing physics and quantum machine learning for next-generation battery health prognostics: A critical review and roadmap,” Results in Engineering, vol. 29, p. 109538, Mar. 2026
-
[17] P. Kakosimos, A. N. Saberi, and L. Peretti, “An Adaptive ML Framework for Power Converter Monitoring via Federated Transfer Learning,” IEEE Trans. Power Electron., vol. 40, no. 11, pp. 16048–16054, Nov. 2025.
-
[18] Kumar, S.; Sharma, R.; Mishra, Y. Fault-Tolerant Multilevel Inverter Topologies with Reduced Complexity for Renewable Energy Applications. IEEE Journal of Emerging and Selected Topics in Power Electronics 2022, 10, 4512–4525.
-
[19] L. Kou, C. Liu, G.-W. Cai, and Z. Zhang, “Fault diagnosis for power electronics converters based on deep feedforward network and wavelet compression,” Electric Power Systems Research, vol. 185, p. 106370, 2020.
-
[20] P. J. Hueros-Barrios, F. J. Rodríguez Sánchez, P. Martín Sánchez, C. Santos-Pérez, A. Sangwongwanich, M. Novak, and F. Blaabjerg, “Digital Twin Approach for Fault Diagnosis in Photovoltaic Plant DC–DC Converters,” Sensors, vol. 25, no. 14, p. 4323, 2025.
-
[21] C. Labiod, R. Meneceur, A. Bebboukha, A. Hechifa, K. Srairi, A. Ghanem, I. Zaitsev, and M. Bajaj, “Enhanced photovoltaic panel diagnostics through AI integration with experimental DC to DC Buck Boost converter implementation,” Scientific Reports, vol. 15, p. 295, 2025.
-
[22] L. Breiman, “Random forests,” Machine Learning, vol. 45, no. 1, pp. 5–32, 2001.
-
[23] F. Pedregosa et al., “Scikit-learn: Machine learning in Python,” Journal of Machine Learning Research, vol. 12, pp. 2825–2830, 2011.
-
[24] J. Snoek, H. Larochelle, and R. P. Adams, “Practical Bayesian optimization of machine learning algorithms,” in Advances in Neural Information Processing Systems 25, 2012, pp. 2951–2959.

I. J. of Electrical & Electronics Research