Articles published in IJEER

Special Issue on Applications of Artificial Intelligence and Internet of Things in Process Control


Remote Fault Identification and Analysis in Electrical Distribution Network Using Artificial Intelligence

This research describes a method for wavelet decomposition and machine learning-based fault site classification in a radial power distribution network. The first statistical observation is produced using wavelet decomposition and wavelet-based detailed coefficients in terms of Kurtosis and Skewness parameters. For this objective, six distinct machine learning methods are deployed. They are evaluated and compared using unknown data sets with varying degrees of unpredictability. One approach has been shown to be the most accurate in locating the location of the problem bus.

Read more

An Approach for Identifying Network Intrusion in an Automated Process Control Computer System

Technology and networks have improved significantly in recent decades, and Internet services are now available in almost every business. It has become increasingly important to develop information security technology to identify the most recent attack as hackers are getting better at stealing information. The most important technology for security is an Intrusion Detection System (IDS) which employs machine learning and deep learning technique to identify network irregularities. To detect an unknown attack, we propose to use a new intrusion detection system using a deep neural network methodology which provides excellent performance to detect intrusion. This research focuses on an automated process control computer system that recognizes, records, analyzes, and correlates threats to online safety.

Read more

A Switchable Filtering Antenna Integrated with U-Shaped Resonators for Bluetooth, WLAN & UWB Applicationse

In this paper, A Switchable Filtering Antenna Integrated With U-Shaped Resonators for Bluetooth, WLAN & UWB Applications is presented. To achieve the UWB operation, a rectangular defect on the ground plane and square slots are etched on the rectangular patch. The selectivity of frequency is achieved by integrating a Hairpin filter. Three switches are connected at the corners of the filter to achieve frequency re-configurability. A total of eight Boolean combinations are possible by controlling ON and OFF these switches. This filtering antenna acts as a band pass filter and picks distinct frequency bands within the UWB frequency. It can be used for wireless applications such as Long-Distance Radio Communication, Aviation Services, WLAN, C-band satellite communication, Wi-MAX, mobile satellite sub-band, radar communications, and space communications.

Read more

A Multi Stub Polygon Shaped Textile Antenna for Deformation Performance Using Aperiodic DGS

A compact fully flexible antenna with 1.22 as dielectric constant with 0.016 loss tangent is designed for wearable biomedical applications. It has dimensions of 40.5 x 23 x 0.97 mm3. The polygon-shaped patch is modified to achieve ultra-wideband frequencies using partial ground as 16.5mm and a periodic vertical slot of 13x2 mm2 structure in defected ground structure to enhance the wide bandwidth of 2.6-11.1 GHz. Using a transmission line equation and a microstrip line feeding method, the resulting antenna operates at a biomedical frequency in open space and on the body-worn case with multi band i.e. 3.1 and 5GHz. The deformation process works well for the proposed antenna without affecting its actual bandwidth with 20 to 60 mm radii.

Read more

Design of Low Power and Process Control Hybrid Adder with Complemented Carry Structure

A Hybrid logic style is most popular when compared to other logic styles in implementation of full adder circuits. Conventional hybrid adder uses truth table with true form of carry in and carry out. This will result in non-identical outputs of sum and carry for about 75% of the input combinations. Alternate truth table has been proposed to increase the similarity of sum and carry outputs. In this paper, circuit is designed for complemented carry in and complemented carry out of full adder. This novel structure allowed to design 20-T hybrid adder with process control, low power and low power delay product. The proposed adder structure is applicable for ripple carry adder.

Read more